We promise a brighter tomorrow via the technological innovation. We are capable of showcasing high-quality and high-functional products with creative designs as we have concentrated our efforts on R&D activities while actively applying the customers’ needs and changing market trends.
Please enter your email address to receive the product information.
Incorrect email address format has been used.
Vertical Bottom Flat Bottom
EH2350
EH2351
EH2352
EH2030
EH3090
Vertical Bottom Flat Bottom
A/F795
EgisPacific
EgisPacific(P)
EgisPacific(L)
Topside Exposed Deck / Deck House (Exterior)
UT6581
ST1020
Watar Ballast Tank
EH2350
EH2351
EH2352
EH2030
Cargo Hold(Bulk carrier) · Cargo Hold(Container ship) · Cargo Tank (Oil tanker)
EH2090
EH4200
EH2350
Cargo Tank(Chemical tanker)
IZ180(N)
EH2630
EP174(T)
Cargo Tank(LNG vessel)
VP186
EN9771(D)
Engine Room Void Space
EH4600
EH2350
The KCC shall strive in earnest to be a sustainable company through eco-friendly activities under the management philosophy of “Creating Value for a Better Life for All.” With the establishment of the environmental management policy, the KCC is committed to fulfilling the environmental responsibility and role of mitigating environmental impacts may occur across the supply chain and business. The policy's scope shall be applied to the headquarters (HQ), domestic and overseas production and sales corporations, and affiliates. The suppliers, joint ventures (VCs), and others are also recommended to comply with the policy.
Under the management philosophy of “Creating Value for a Better Life for All,” the KCC pursues to fulfill its social responsibility and roles in protecting human rights as a global corporate citizen while aiming at becoming a sustainable company by preventing potential human rights infringements which may occur in conducting its business and company-wide value chain.
The KCC shall observe human rights-related international standards and guidelines including the Universal Declaration of Human Rights (UDHR), UN Guiding Principles on Business and Human Rights (UNGP), and OECD Guidelines for Multinational Enterprises and the related regulations of each country to respect and protect the human rights of all the executives and employees. This human rights management policy shall be applied to the entire executives and employees of the KCC’s domestic and overseas production and sales corporations, affiliates, sub-subsidiaries, and JVs besides all suppliers and partner companies.
If there is any conflict between the policy and local regulations, much stricter standards shall precede. The KCC shall reduce the risk factors on the human rights and labor via continuous monitoring and the application of the zero tolerance principle to contribute to improving and spreading an awareness on the human rights issues of all stakeholders directly and indirectly impacted by the KCC’s business.
Shall display respect for all employees and offer equal opportunities to them. Shall strive not to cause inhumane treatments including psychological or physical pressure, mistreatment, or others. Shall take stern measures on any impersonal act including violence, sexual violence, sexual harassment, sexual abuse, physical punishment, abusive language, bullying, and public shame.
In terms of the HR practices including hiring, promotion, wages, training, disciplinary action, and retirement, shall prohibit discrimination not allowed by the regulations of each country according to any conditions including race, nationality, ethnicity, religion, gender/gender identity, age, disability, marital status, family support status, social status, and political orientation.
Shall ensure the working employees on their free will and prohibit forced labor according to the mental and physical restraints including the slavery system and human trafficking.
Shall comply with the minimum employment age prescribed by the laws/regulations of each country and local region. Shall verify the age of all prospective employees in a proper way.
Shall respect for the freedom to choose an occupation and ensure the freedom of association, organization, and collective bargaining according to the labor relation laws/regulations of each country.
Shall comply with the labor relation laws/regulations prescribed by each country and region, which are running the business.
Shall pay the minimum wage or higher along with payslip according to the laws/regulations of each country and region and if applicable, provide overtime pay according to the same laws/regulations.
Shall prohibit the capital inflow from the disputed groups by procuring the conflict minerals excavated unethically in the disputed regions including Africa and strive to provide customers with the products made of the minerals excavated ethically.
Shall establish related guidelines for the safety and health of the employees and make them comply with the guidelines. Shall remove risk factors in a workplace, take risk prevention measures, conduct work according to safety rules, make the employees wear personal protection equipment, and conduct periodic safety trainings to offer a safe work environment to all the employees.
Shall prohibit all activities giving a sense of sexual humiliation to others including sexual harassment and abuse and all bullying activities giving physical/psychological pains to others by abusing one’s superiority in a rank or relation. Shall be also committed to prevent damages by conducting a training on how to prevent sexual harassment and bullying at work. Shall create a channel to report any damages. In case where there is a victim, shall protect the victim and take relief measures while giving proper punishments to the offender.
Shall take proper measures not to infringe on the human rights (the environment, safety & health, freedom of residence) of vulnerable groups including local residents, children, women, disabled people, foreign workers due to the management activity of the company.
When it comes to providing customers with products and services, all employees shall consider the life, health, and property of the customers as the top priority and shall take the best actions to protect the personal information of the customers.
We have supported win-win growth support programs in various areas
including education, fund, and the mutual cooperation and establish
the win-win culture with our suppliers.
The KCC Corp. (hereinafter “Company”) intends to become a global advanced material company which generates values for the customers, shareholders, and society while having secured the eco-friendly management capability and technical prowess under the management philosophy of “Creating Value for a Better Life for All.” As a respected global enterprise, the company strongly believes that establishing a sound governance structure and securing the trust of all stakeholders will lead to the foundation for the sustainable management activity. With its firm faith, the company has established the following charter of corporate governance. Based on the charter, under the supervision of the independent BOD, the management of the company shall pursue the transparent and responsible management. The company shall strive to achieve a transparent and advanced governance to increase the shareholders’ benefits, protect the rights of the stakeholders, improve the corporate value, and make sustainable growth.
All executives and employees of the KCC observe the Monopoly Regulation and Fair Trade Act as well as the KCC’s guidelines in South Korea and the countries where overseas corporations conduct business.
In case where the Act is violated, the company shall be responsible for civil and criminal penalties, fines or compensation for damages, and the applicable employee may be subject to fines or imprisonment. More importantly, employees shall work with the mindset their violation may cause colossal damages to the company as it may result in the corporate value decline. The major details and guidelines of the Act are described as follows.
Major laws /regulations |
Major details and guidelines |
---|---|
Fair Trade Act | The prohibition of unfair trade practices: One shall not use one’s superior position in trade to give disadvantages to the suppliers(Refusal of transaction, discriminatory treatment, forced trade, abuse of dominant position, constraint trade and the act of maintaining the resale price). The prohibition of abusing one’s dominant position in the market: In case of a dominant market player, one shall neither determine, maintain or change the price or payment for the services unfairly nor interfere in the business activities of another business or the entrance of a new competitor. One shall neither do trades to unfairly eliminate the competitors nor behave in a way that may harm the interests of the consumers. The prohibition of unfair common action(collusion): One shall not agree on the matters of restricting the competition such as restricting the competitor, price, production/sales quantity, trading area/opposite party, etc. One shall not exchange sensitive information that may have an impact on these matters directly or indirectly. The prohibition of an unfair common action(bid rigging): In the bidding process, one shall not discuss/agree on a prospective successful bidder and the bidding price with another party prior to the bidding. One shall not share the bidding information with the competitors. The control of suppressing the concentration of the economic power: One shall avoid unfair internal transactions among affiliates. In case of performing internal transactions, one shall obtain the approval of the Sustainability Management Committee in advance. |
Subcontracting Act | One shall comply with the duty to prepare, issue and preserve the agreement. One shall perform an unfair decision on the pricing, delayed payment, unfair terms, unfair reductions, unfair order cancellation, unfair refusal of receipt, and unfair return. One shall not request one’s suppliers to provide the technical data. If necessary, the confidentiality agreement shall be concluded, and the data shall not be used for other purposes not stated in the agreement. |
FAIR AGENCY TRANSACTIONS ACT | One shall observe the duty to prepare, issue and preserve the agreement. One shall not conduct forcing purchase, profit and sales targets, inflicting disadvantages, or interfering with management activities. |
Other laws | One shall observe the duties and prohibited matters to be implemented by business in compliance with the Act on the Regulation of Terms & Conditions, Act on Fair Labeling & Advertising, Framework Act on Consumers, and Product Liability Act. |
The area is m²,
the required amount is about L.
What is ASA resin?
As the abbreviation of Acrylonitrile Styrene Acrylate, it means a material resistant to shock and heat with enhanced luster.
Buildings can have a luxurious look by applying highly corrosive-resistant ASA colors to the outside of the window profile.
On-screen colors may not be the same as actual products'.
Various high-quality window profiles have an excellent thermal and sound insulation performance with a gorgeous look.
Our balcony windows are made of functional subsidiary materials with scientific designs.
They save energy with high thermal insulation and airtightness performance and create a comfortable indoor space.
Our system windows are innovative, multifunctional complex windows with a premium European-style design
In the opening and closing of the windows. As a high-quality European window with various functionalities, excellent performance and sophisticated design, they create a luxurious living space.
Any area of certain walls, poles, crossbeams, floors or the roofs of any building shall be structured fireproof enough to endure, if any fire breaks out, the time as prescribed in the Attached Table 1, according to its story, height and size by building purpose.
Purpose | Wall | Beam/pole | Floor | Roof/roof truss | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Exterior wall | Interior wall | ||||||||||
Classification | Size story/ maximum height (m) |
Bearing wall | Non-bearing wall | Bearing wall | Non-bearing wall | ||||||
Concern for combustion | No concern for combustion | Partition wall | Shaft-seal compartment wall | ||||||||
General facilities | 12/50 | above | 3 | 1 | 1/2 | 3 | 2 | 2 | 3 | 2 | 1 |
or below | 2 | 1 | 1/2 | 2 | 1.5 | 1.5 | 2 | 2 | 1/2 | ||
4/20 or below | 1 | 1 | 1/2 | 1 | 1 | 1 | 1 | 1 | 1/2 | ||
Residential facilities | 12/50 | above | 2 | 1 | 1/2 | 2 | 2 | 2 | 3 | 2 | 1 |
or below | 2 | 1 | 1/2 | 2 | 1 | 1 | 2 | 2 | 1/2 | ||
4/20 or below | 1 | 1 | 1/2 | 1 | 1 | 1 | 1 | 1 | 1/2 | ||
Industrial facilities | 12/50 | above | 2 | 1.5 | 1/2 | 2 | 1.5 | 1.5 | 3 | 2 | 1 |
or below | 2 | 1 | 1/2 | 2 | 1 | 1 | 2 | 2 | 1/2 | ||
4/20 or below | 1 | 1 | 1/2 | 1 | 1 | 1 | 1 | 1 | 1/2 |
Soundproof related terms
Grade | Grade standard (Rw+C) |
---|---|
1st | 63dB ≤ Rw+C and boundary walls not shared between households |
2st | 58dB ≤ Rw+C < 63dB |
3st | 53dB ≤ Rw+C < 58dB |
4st | 48dB ≤ Rw+C < 53dB |
Give additional points to “7.7 Soundproof Performance of boundary walls not shared between households” in the “7. Indoor environment” area based on G-SEED(Green Standard for Energy & Environmental Design)
Walls | Absorbers (Glass Wool, Mineral Wool) | Increase the density of a gypsum board | Increase the thickness of a stud and gypsum board | Use T-Silent-Stud System |
---|---|---|---|---|
Block the sound path by separating studs from each other. | Regular Gypsum Board< Perforated Sound Absorption Board |
|||
Around 10dB is reduced. | About 6dB is reduced. | About 2-3dB is reduced. | About 2-3dB is reduced. | About 7-15dB is reduced. |
Levels | Awareness level |
---|---|
1dB | Felt no change |
3dB | Felt a change |
5dB | Surely felt changes |
10dB | 2 times greater changes are felt |
20dB | 4 times greater changes are felt |
Noise | Noise source | Impact on the human body |
---|---|---|
30dB | Wall clock ticking sound | Comfortable |
35dB | Quiet park | Have almost no impact on sleep |
50dB | Quiet office | Breathing and pulse rate increased; sleep quality is degraded |
70dB | Phone bell ring | Hearing loss is started |
90dB | Factory noise | Urine volume increased; had hearing loss |
SMART is a product with the highest economic efficiency as the HPM panel and affordable hardware are applied.
Left and right hinges are used and exposed areas are minimized by attaching the hinges to the panel edge. Lock and hangers are coated with a matt finish. Pieces are not exposed by covering a bracket with a cap.
Half Recessed Hinge
Half Butterfly Hinge
Pivot Hinge
Pivot Hinge
Display Window/Lock
Hanger
L-strap Bracket
Top Hardening Mould
Rest
As the HPM panel is applied, it is the most common product group at an affordable price range.
Pivot type hinges are applied to minimize the deformation and deflection of doors. The outside of the doors have a Display Window to check whether the space is occupied or not. With the exclusive piece, the applicability and durability are excellent. Hangers are also installed, also serving as a stopper.
Top Hinge
Bottom Hinge
Hanger
L-strap Bracket
Display Window/ Lock
Top Hardening Mould
Butterfly Hinge
Display Window
Rest-Hardware
Exclusive Piece
As the HPM panel is applied, the durability is enhanced as the Top Hardening Mould and Top Hinge are combined to evenly distribute the shock caused during the opening/closing of the doors to the entire system. With the exclusive piece, the applicability and durability are excellent. The outside of the doors have Display Window to check whether the space is occupied or not. Damage is minimized by increasing the binding capacity between the panel and U type Lock.
Top Hinge
Bottom Hinge
Lock
Display Window
Hanger
Hanger Board
L-strap Bracket
Rest
Butterfly Hinge
Top Hardening Mould
Exclusive Piece
As the HPM panel is applied, the appearance is beautiful since the hardware is powder coated with polyester.
Pivot type hinges are applied to minimize the deformation and deflection of the doors. By combining with a calblock, it has outstanding durability. By inserting a bottom hinge to the doors, it has a beautiful design since the bottom line of the front panel is uniform in a straight line.
Top Hinge
Bottom Hinge
Lock
Display Window
Hanger
L-strap Bracket
Butterfly Hinge
Top Hardening Mould
Top Moulding Cover
Rest
As the HPM panel is applied, more elegant and unique feelings are created by applying WAVE patterns to the hardware. The outside of the doors have Display Window to check whether the space is occupied or not. A sliding lock is applied.
Display Window
Lock
Lock
Rest
Bracket
Top Hardening Mould
Butterfly Hinge
As the HPM panel is applied, the appearance is beautiful with no exposure of pieces as the panel fixing piece area is finished with ABS caps. With no exposure of the rest in the front panel, the appearance is neat.
Hinge
Lock
Lock
Lock
Display Window
Hanger
Stopper
L-strap Bracket
Rest
Top Hardening Mould
Butterfly Hinge(Gold)
Butterfly Hinge(White)
Butterfly Hinge(Gray)
Display Window(Gold)
Display Window(White)
Display Window(Gray)
Color Series mean the colors of HPM films attached to a plane board of KCC Beauticle.
Bathroom partitions can be formed by mixing diverse colors. Besides the basic color series, customized colors can be also available.
With monotone color or wood pattern films, a neat design can be produced.
BT669
BU649
BT609
BD670
BT613
BU641
BT601
BU642
BU643
BU653
BU622
BN623
BU645
BN626
BU647
With basic colors and stone and wood pattern films, various designs can be created.
BT610
BU651
BU652
BT611
BT612
BN629
BN631
BD671
BD673
BD674
BU654
BU655
BU648
BD668
BT608
STEEL / ART STONE means a stainless board applied to NEOPOP STEEL and stone films in Gray, Dark Gray, and Black, applied to ART STONE.
ECO304
Gray
Dark Gray
Black
Color films with beautiful designs, applied to high-quality specifications.
BS683
BS681
BS685
BS686
BS684
As a panel surface finish, a stainless steel plate is applied, so you can create a beautiful appearance. A wide range of designs and pricings are available by applying stainless steel plates to each area. With the stainless steel plate, durability is excellent along with a more elegant atmosphere. Almost no damage is made on a surface even in case of humidity penetration. After finishing the edge with the PVC band, a bended part is finished with stainless steel, so water resistance performance further increases.
Hinge
Lock
Lock
Lock
Display Window
Hanger
Stopper
L-strap Bracket
Rest
Top Hardening Mould
Butterfly Hinge(Gold)
Butterfly Hinge(White)
Butterfly Hinge(Gray)
DiDisplay Window (Gold)
Display Window(White)
Display Window(Gray)
As a stone panel is applied, if it is used in luxurious buildings including hotels, restaurants, and interior shops, a richer mood can be created. By applying natural stone to the surface finish, the finish is not deformed even if it is exposed to moisture for a long time.
Hinge
Lock
Lock
Lock
Lock
Hanger
Stopper
L-strap Bracket
Rest
Top Hardening Mould
Butterfly Hinge(Gold)
Butterfly Hinge(White)
Butterfly Hinge(Gray)
DiDisplay Window (Gold)
Display Window(White)
Display Window(Gray)
Material wood is applied to the edge of the HPM panel, so a harder and more luxurious ambiance can be created.
By postforming the material wood’s edge area, with no use of mohair, the outside look can be completely blocked.
Hinge
Lock
Lock
Lock
Lock
Hanger
Stopper
L-strap Bracket
Rest
Top Hardening Mould
Butterfly Hinge(Gold)
Butterfly Hinge(White)
Butterfly Hinge(Gray)
DiDisplay Window (Gold)
Display Window(White)
Display Window(Gray)
The EPS panel is applied, so almost no expansion and warping occur due to moisture, and it is recyclable.
By postforming the panel’s edge area, the outside look can be completely blocked.
The EPS PVC panel is comprised of several panels. Since internal cohesiveness is distributed, no warping occurs.
L-strap Bracket
L-strap Bracket2
Rest
Top Hardening Mould(B)
Hanger
Lock
By using the 18mm CMP (Compact Melamine Panel) in the entire surface, water resistance and durability are excellent.
Depending on how to install the Top Hardening Mould, two types of appearance can be made from one product.
L-strap Bracket
L-strap Bracket2
Rest
Top Hardening Mould(B)
Hanger
Lock
As a core board panel is applied, the round edge is attached to the doors and sides of a medium/scrap plate to minimize a gap between the door and medium/scrap plate.
Various designs can be made by processing the panels via line processing or attaching the metal HPM.
With the exclusive piece, the applicability and durability are excellent.
L-strap Bracket
Rest
Top Hinge
Top Hardening Mould
Stopper
Hanger
Lock
Display Window
BUILDING ACT / ENFORCEMENT DECREE OF THE BUILDING ACT / Regulation on the Standards for Evacuation and Fireproof Construction of Building (Enforcement date: Aug 2020)
The main structural member and roofs are required to have a fireproof structure as prescribed in Article 50 (Fireproof structure and the fire wall of buildings) and Article 51 (Buildings within the fire zone) to secure fire safety in buildings.
Buildings including factories, warehouses, cultural and gathering facilities, medical facilities, and apartment buildings, which are prescribed by a presidential decree
Main structural member" means a bearing wall, column, floor, beam, roof truss, and main stairway.
BUILDING ACT / ENFORCEMENT DECREE OF THE BUILDING ACT / Regulation on the Standards for Evacuation and Fireproof Construction of Building (Enforcement date: Nov 2019)
Dry method(finish with an aluminum panel and stone materials), wet method(plastering finish on the outside) walls, etc.
Any certain area of walls, poles, crossbeams, floors or roofs of any building shall be structured fireproof enough to endure, if any fire breaks out, the time as prescribed in the Attached Table 1, according to its story, height and size by building purpose.
Purpose | Wall | Beam/ pole | Floor | Roof/roof truss | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Exterior wall | Interior wall | ||||||||||
Classification | Size story/ maximum height (m) | Bearing wall | Non-bearing wall | Bearing wall | Non-bearing wall | ||||||
Concern for combustion | No concern for combustion | Partition wall | Shaft-seal compartment wall | ||||||||
General facilities | 12/50 | above | 3 | 1 | 1/2 | 3 | 2 | 2 | 3 | 2 | 1 |
or below | 2 | 1 | 1/2 | 2 | 1.5 | 1.5 | 2 | 2 | 1/2 | ||
4/20 or below | 1 | 1 | 1/2 | 1 | 1 | 1 | 1 | 1 | 1/2 | ||
Residential facilities | 12/50 | above | 2 | 1 | 1/2 | 2 | 2 | 2 | 3 | 2 | 1 |
or below | 2 | 1 | 1/2 | 2 | 1 | 1 | 2 | 2 | 1/2 | ||
4/20 or below | 1 | 1 | 1/2 | 1 | 1 | 1 | 1 | 1 | 1/2 | ||
Industrial facilities | 12/50 | above | 2 | 1.5 | 1/2 | 2 | 1.5 | 1.5 | 3 | 2 | 1 |
or below | 2 | 1 | 1/2 | 2 | 1 | 1 | 2 | 2 | 1/2 | ||
4/20 or below | 1 | 1 | 1/2 | 1 | 1 | 1 | 1 | 1 | 1/2 |
Vertical Bottom Flat Bottom
EH2350
EH2351
EH2352
EH2030
EH3090
Vertical Bottom Flat Bottom
A/F795
EgisPacific
EgisPacific(P)
EgisPacific(L)
Topside Exposed Deck / Deck House (Exterior)
UT6581
ST1020
Watar Ballast Tank
EH2350
EH2351
EH2352
EH2030
Cargo Hold(Bulk carrier) · Cargo Hold(Container ship) · Cargo Tank (Oil tanker)
EH2090
EH4200
EH2350
Cargo Tank(Chemical tanker)
IZ180(N)
EH2630
EP174(T)
Cargo Tank(LNG vessel)
VP186
EN9771(D)
Engine Room Void Space
EH4600
EH2350
Please enter the email information to share the reverberation time calculation results.